Trigger & Sighting Adjustments for Morini 162 EI

Free Performance Evaluation for you

Trigger adjustment

The trigger is adjusted at the factory according to the ISSF rules in an optimal manner, but it is still modifiable by

the following way:

3.1 Adjustment of trigger take-up

Turning adjustment screw (1) clockwise will shorten travel. After adjust screw (1) check trigger weight and

readjust if necessary.

3.2 Adjustment of first stage travel

Turning adjustment screw (2) clockwise increases the load. The range is 300 – 700 g.

3.3 Adjustment of second stage travel

Turning adjustment screw (3) clockwise increases the load. The range is 50 – 300 g.

3.4 Adjustment of trigger position

Unlock screw (4) and move the trigger to the desired position, then lock screw (4) again.

 Sighting adjustment

4.1 Vertical adjustment

To move group on target DOWN, turn adjustment screw (1) clockwise. One click will move hit on target by

1.5 mm.

4.2 Horizontal adjustment

To move group on target to the RIGHT, turn adjustment screw (2) clockwise. One click will move hit on

target by 1 mm.

4.3 Adjusting the width of the rear sight notch

Turning adjustment screw (3) clockwise will widen the rear sight opening by 0.1 mm every click.

More info: http://www.morini.ch/download/2.pdf

About midwestacademyconsulting
President of Midwest Academy Consulting Group

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: